manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 99

99

Routine Maint

enanc

e

 

 

   Manual  Feeder  Cleaning 

 If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder’s scanning area and rollers. 
 Clean the rollers of the feeder with a cloth dampened with water, and wipe them with a soft, dry cloth. 

  

 

 

•   Spin the rollers while cleaning them. 
•   If the document feed scanning area is dirty, documents may not be scanned clearly, and the size of the document may not be 

detected correctly. 

1

Clean the rollers of the feeder.

1.  Pull the lever, and open the 

feeder cover.

2.  Clean the rollers (a total 

of three places) inside the 
feeder cover.

2

Clean the rollers inside the inner cover.

1.  Open the inner cover, 

holding it by its tab.

2.  Clean the rollers (a total of 

three places) inside the inner 
cover.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands