manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 117

117

Tr

oubleshooting

3

Gently push the paper drawer back into the machine until it clicks into place in 
the closed position.

When returning the paper drawer to its original position, be careful not to get your fi ngers 
caught, as this may result in personal injury.

If the Paper Deck Unit-B2 was moved away from the main unit, reconnect it to the main unit.

4

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 
jam is cleared.

   Cassette  Feeding  Unit-AF1  (Optional) 

  

 

 

 If the Paper Deck Unit-B2 is attached, move the paper deck unit away from the main unit before proceeding with this procedure. 

1

Open the paper drawer’s upper right cover and lower right cover.

2

1

1.  Open the paper drawer’s 

upper right cover.

2.  Open the paper drawer’s 

lower right cover.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands