Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 148

Page: 148 / 190

148

For the Scan and Store Function

Follow the directions below based on the message that appears on the touch panel
display.

●

If the message <Scanning will be canceled because the memory is full. Do you want to store the
scanned pages?> appears:

Select [Yes] or [No].

[Yes]:
[No]:

The pages scanned into memory are stored. When storing is complete, scan the remaining originals.
The pages scanned into memory are not stored.

●

If the message <Scanning will be canceled because the memory is full. Wait a moment, then try again.>
appears:

Select [OK].

[OK]:

Returns to the Basic Features screen of the function you are using.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands