manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 45

45

F

lo

w of Basic Oper

a

tions

1

[Book   2 Pages]

You can scan facing pages, such as in a book one sheet at a 
time.

2

[Booklet Scan]

You can scan with booklet settings.

3

[N on 1]

You can scan multiple pages of the original and reduce the 
size of the images to fi t onto a single page. You can also 
change the order of the layout.

4

[Erase Frame]

This mode enables you to erase shadows that appear when 
scanning various types of originals. You can also erase 
shadows of the punch holes. 

5

[Sharpness]

This mode enables you to adjust image quality for copying. 
You can use this mode when you want to soften and sharpen 
text, lines, or the outline of the image.

6

[Nega/Posi]

This mode enables you to scan and record the original image 
by inverting the hues and gradations.

7

[Job Build]

You can scan originals that are too many to be placed at once, 
by dividing them into multiple batches. After all originals are 
scanned, storing is started.

8

[Diff erent Size Originals]

You can scan originals of diff erent size fed together in one 
group.

  

 

5

4

1

2

3

6

7

8

 

 [Options] 

 The available functions may diff er, depending on the storage 
location. 

 

 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands