manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 66

66

3

Load the appropriate size paper into the paper drawer.

1.  Make sure that the paper 

size setting of the paper 
drawer matches the size 
of the paper to load in the 
paper drawer.

2.  Load the paper stack against 

the right wall of the paper 
drawer.

4

Change the paper drawer’s paper size plate to match the new paper size.

1

3

2

1.  Open the inside cover of the 

paper drawer, and lift up the 
plate.

2.  Rotate the plate so that the 

new paper size is on the 
right side of the plate.

3.  Insert the plate straight 

down, and close the inside 
cover.

The paper size that cannot be used depending on the model and settings is also listed on the paper size 
plate.

5

Gently push the paper drawer back into the machine until it clicks into place in 
the closed position.

When returning the paper drawer to its original position, be careful not to get your fi ngers 
caught, as this may result in personal injury.

 Loading Envelopes into the Multi-Purpose Tray 

 Feeding direction into the multi-purpose tray diff ers, depending on the type of the envelopes. Preparation is required 
beforehand to prevent wrinkling or paper jam. (See e-Manual > Basic Operations.) 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands