Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 171

Page: 171 / 190

171

oubleshooting

Q&A

Additional Information

• For information on registering an

Advanced Box destination in the Address
Book, see e-Manual > Scan and Send.

• For more information on forwarding

settings, see e-Manual > Settings/
Registration.

How do I set to create a booklet

with a file in a mail box?

You can create a booklet using

the Booklet mode. Specify the

following settings.

■

Setting procedure:

1. Press [Access Stored Files]



[Mail Box]



select a stored document.

2. Press [Print]



[Change Print Settings]



[Options].

3. Press [Booklet]



[Booklet Scan]



[Fold

+ Saddle Stitch].

4. Specify the cover settings, orientation,

and detailed settings



press [OK].

Additional Information

• For details on the Booklet mode settings,

see e-Manual > Access Stored Files.

• Use a document that was stored with the

[Booklet Scan] mode set.

• For details on the Booklet Scan mode

settings, see e-Manual > Scan and Store.

I cannot print PDF files stored in

the Advanced Box. Are optional

products required?

The following optional products

are required to print PDF files:

PS Printer Kit
Direct Print Kit (for PDF/XPS)

Additional Information

If you are using the PS Printer Kit, the Direct
Print Kit (for PDF/XPS) is unnecessary.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands