manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 114

114

7

Remove any jammed paper from the lower part of the right cover of the 
machine.

8

Remove any jammed paper from behind the right cover of the machine.

1

2

1.  Remove any jammed paper from the 

upper part behind the right cover of 
the machine.

2.  Remove any jammed paper from the 

central part behind the right cover 
of the machine.

The lower part behind the right cover of the machine may become hot during use. When 
removing jammed paper or when inspecting the inside of the machine, do not touch this area of 
the machine, as doing so may result in burns.

9

Remove any jammed paper from the feeding unit of the multi-purpose tray.

If you cannot remove the jammed paper from the bottom side feeding unit of the multi-purpose tray, 
remove it from the multi-purpose tray side.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands