manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 103

103

Routine Maint

enanc

e

   Consumables 

 The following consumables are available from Canon. For more information, contact your local authorized Canon dealer. We 
recommend that you order paper stock and toner from your local authorized Canon dealer before your stock runs out. 

 

●

 Recommended  Paper 

  In addition to plain paper (11” x 17”, LGL, and LTR size), recycled paper, color paper, transparencies (recommended for 
this machine), tracing paper, labels, and other types of paper stock are available. For more information, contact your local 
authorized Canon dealer.  
  

Do not store paper in places exposed to open fl ames, as this may cause the paper to ignite, resulting in 
burns or a fi re.

  

 

 

•   Some commercially available paper types are not suited for this machine. Contact your local authorized Canon dealer when 

you need to purchase paper. 

•   To prevent moisture build-up, tightly wrap any remaining paper in its original package for storage. 

  

 

 

 For high-quality printouts, use paper recommended by Canon. 

 

●

 Toner 

 If a message prompting you to replace the toner cartridge appears on the touch panel display, replace the used toner 
cartridge with a new one. 
  For optimum print quality, using Canon genuine toner is recommended. 

Product Name

Supported Canon Genuine Toner

imageRUNNER ADVANCE 4251/4245

Canon GPR-43 Black Toner

imageRUNNER ADVANCE 4235/4225

Canon GPR-42 Black Toner

  

 

 

  

 

 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands