manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 5

5

Ho
w t
o U
se 
T

his Manual

   Symbols  Used  in  This  Manual 

 The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that 
should be observed for safety. 

  

Indicates a warning concerning operations that may lead to death or injury to persons if not performed 
correctly. To use the machine safely, always pay attention to these warnings.

Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. 
To use the machine safely, always pay attention to these cautions.

Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the 
machine correctly, and avoid damage to the machine or property.

Indicates a clarifi cation of an operation, or contains additional explanations for a procedure. Reading 
these notes is highly recommended.

Indicates an operation that must not be performed. Read these items carefully, and make sure not to 
perform the described operations.

 

●

   Driver  Installation  Guide 

 

■

 Provides instructions on installing the printer, fax, and other drivers. 

•   Printer Driver Installation Guide 
•   Mac Printer Driver Installation Guide 
•   Fax Driver Installation Guide 
•   Network ScanGear Installation Guide 

 

■

 Included on the same CD-ROM as each driver. 

 

●

   e-Manual 

 

■

 Describes all the functions of the machine. Also provided with a 
search function that is useful for fi nding and checking information. 

 

■

 Includes  “Practical  Workfl ows,” which introduces fl ows of practical 
operations using functions of the machine. 

 

 

 

 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands