manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 74

74

3

Gently push the paper drawer back into the machine until it clicks into place in 
the closed position.

When returning the paper drawer to its original position, be careful not to get your fi ngers 
caught, as this may result in personal injury.

Never place paper or any other items in the empty part of the paper drawer next to the envelopes. Doing so 
may cause paper jams.

If output has been stopped due to an insuffi

  cient number of envelopes, load more envelopes, and follow 

the instructions on the touch panel display. Printing resumes.

 

 

 Loading the Envelope after Specifying the Size 

 This section explains how to load the envelopes that are specifi ed in Settings/Registration into the envelope cassette. 
  

 

 

 Make sure that you change the envelope settings from the Settings/Registration screen before carrying out the following 
procedure. (See e-Manual > Settings/Registration.) Otherwise, the machine may not recognize the changes you have made. 

1

Open the drawer.

1

2

1.  Press and release the button 

on Paper Drawer 2.

2.  Grip the handle, and pull 

out the paper drawer until it 
stops.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands