manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 68

68

1

Open the paper deck unit.

1.  Press the open button.
2.  Open the paper deck unit.

The inside lifter automatically 
descends to the paper loading 
position.

If the machine is in the Sleep mode (the touch panel is not displayed, and only 

(Energy Saver) is lit), you 

may be unable to open the paper deck unit. In this case, press 

(Energy Saver) to reactivate the machine, 

and then press the open button on the paper deck unit.

2

Prepare the paper to load.

Open the packaging for the 
paper, and remove the paper 
stack.

•  For high-quality printouts, use paper recommended by Canon.
•  Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.

3

Load the paper stack into the paper deck unit.

1.  Load the paper stack against 

the back left guide of the 
paper deck unit.

2.  Close the paper deck unit.

When the paper deck unit 
is closed, the inside lifter 
automatically ascends, and the 
machine becomes ready for 
printing.

When closing the paper deck unit, be careful not to get your fi ngers caught, as this may result in 
personal injury.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands