manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 93

93

Routine Maint

enanc

e

2

Prepare the new toner cartridge.

1.  Open the package of the 

toner cartridge, and remove 
the toner cartridge.

2.  Remove the protective cap 

of the new toner cartridge.

Twist the protective cap of 
the new toner cartridge in 
the direction of the arrow 
(counterclockwise) to remove 
it.

3

Insert the new toner cartridge.

1.  Push the new toner 

cartridge in the direction 
indicated by the arrow on 
the cartridge.

2.  Push the new toner 

cartridge in until it stops.

Support the new toner cartridge with your hand from underneath while pushing it into the machine with 
your other hand.

Firmly push the toner cartridge in until it stops. Otherwise, the toner cartridge will be pushed back out, and 
the toner replacement cover will not close.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands