manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 118

118

2

Remove any paper jammed in the paper drawer’s upper right cover and lower 
right cover.

2

1

1.  Remove any paper jammed 

in the paper drawer’s upper 
right cover.

2.  Remove any paper jammed 

in the paper drawer’s lower 
right cover.

3

Close the covers.

1

2

1.  Close the paper drawer’s 

upper right cover.

2.  Close the paper drawer’s 

lower right cover.

When closing the covers, be careful not to get your fi ngers caught, as this may result in personal 
injury.

Gently close the covers until they click into place in the closed position.

4

Remove any paper jammed in the cassette feeding unit.

1

2

3

1.  Press the open button of the 

paper drawer that is feeding 
the paper.

2.  Grip the handle, and pull 

out the paper drawer until it 
stops.

3.  Remove any jammed paper.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands