manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 81

81

Routine Maint

enanc

e

2

Pull out the staple case, holding it by the green tab.

3

Pull out the empty staple cartridge from the staple case.

PUSH

2

1

1

1.  Press the areas indicated by 

PUSH on both sides of the 
staple case.

2.  Once you have released the 

spring-loaded case, pull out 
the staple cartridge.

4

Insert a new staple cartridge into the staple case.

2

1

3

1.  Insert a new staple cartridge.
2.  Press the spring-loaded 

case down until it clicks into 
place.

3.  Remove the seal holding the 

staples together, by pulling 
it straight out.

•  Do not remove the seal that holds the staples together before you place the staple cartridge into the 

staple case.

•  Only one staple cartridge can be inserted at a time.
•  Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands