manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 88

88

   Removing  Punch  Waste  (For 
Optional Products) 

 This section describes how to remove punch waste from the puncher. 
 When the punch waste tray of the Puncher becomes full, a screen prompting you to remove the punch waste appears on the 
touch panel display. Follow the procedure described below to remove the punch waste. 

  

 

 

  The External 2/3 Hole Puncher-B2 and Inner 2/3 Hole Puncher-A1 are optional products.  

  

  

 

 External 2/3 Hole Puncher-B2  

  

 

 

  The External 2/3 Hole Puncher-B2 is available only when the Staple Finisher-G1 or Booklet Finisher-G1 is attached.  

1

Pull out the punch waste tray.

1.  Open the front cover of the 

puncher.

2.  Pull out the punch waste 

tray.

2

Discard the punch waste.

Make sure that the punch waste tray is completely emptied.

 

 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands