manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 182

182

Q&A

  

 41 

   The touch panel display is 

completely black. 

  

 The main power has not been 

turned ON, or the machine may 

have entered the Auto Sleep 

mode to save energy. Follow the 

procedure below. 

  

 

■

 Turning the main power ON: 

 1. Check whether the power plug is firmly 

inserted into the outlet. 

 2. Open the main power switch cover 

located on the right side of the machine 
and switch the main power switch to the 
“I” side to turn the power ON. 

 

( I )

 

 

■

 Recovering from the Auto Sleep 
mode: 

 Press 

(Energy Saver). 

 Additional  Information 

•  For more information on the Auto Sleep 

mode and Energy Saver mode, see 
e-Manual > Basic Operations. 

•  Follow the procedure below to change the 

Auto Sleep Time. 

 1.  Press 

(Settings/Registration). 

 2. Press [Preferences] 

 [Timer/Energy 

Settings] 

 [Auto Sleep Time]. 

 3. Specify the time 

 press [OK]. 

  

 40 

   It seems as though turning OFF 

the machine is different from the 

previous imageRUNNER. I am 

afraid that this may be a wrong 

operation. 

  

 For the previous imageRUNNER, 

you needed to press and hold the 

control panel power switch for 

more than three seconds before 

the machine entered the Shutdown 

mode. 

 However, for the imageRUNNER 

ADVANCE, you just need to open 

the main power switch cover 

located on the right side of the 

machine, and push the main power 

switch toward the “ ” side. 

 

(      )

 

 Additional  Information 

 For more information, see Before Using This 
Machine. 

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands