Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 24

Page: 24 / 190

Placing Originals

Place the original on the feeder or the platen glass.

Placing originals in the feeder

Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.

Placing originals on the platen glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

Selecting Function

Select [Copy] from the Main Menu screen.

Press [Copy].

Copy Basic Features Screen is displayed.

You can set various copying functions. For more
information, see from p. 26 t o p. 29 in this manual.

This section describes the fl ow of basic copy operations.

How to Make a Copy

• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/

PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.

• If a login service, such as Department ID Management or SSO-H has been set, press

(Log In/Out) to log out.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands