Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 77

Page: 77 / 190

Routine Maint

enanc

Insert the drawer.

1. Gently push the paper drawer back into the machine until it clicks into place in the closed

position.

2. Check the paper size dial, and then register the envelope size in Settings/Registration.

For details on how to register envelope sizes, see e-Manual > Settings/Registration.

When returning the paper drawer to its original position, be careful not to get your fi ngers
caught, as this may result in personal injury.

Never place paper or any other items in the empty part of the paper drawer next to the envelopes. Doing so
may cause paper jams.

If output has been stopped due to an insuffi

cient number of envelopes, load more envelopes, and follow

the instructions on the touch panel display. Printing resumes.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands