Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 175

Page: 175 / 190

175

oubleshooting

Q&A

Can I specify the scan settings from

the computer and then store for

the original loaded in the machine?

It is possible if you are using

Windows. Install the Network

ScanGear Driver in your computer,

and then switch the network scan

function to online.

■

To Install the Driver:

Install using the UFR II User Software CD-
ROM that comes with the machine.

■

To Switch the Network Scan
Function to Online:

Press [Scanner]



[Online].

Additional Information

For instructions on installing the Network
ScanGear Driver, see the Network ScanGear
User’s Guide on the UFR II User Software
CD-ROM.

Can I make copies or send a

facsimile of different size originals

at the same time?

You can make copies or send a

facsimile of different size originals

at the same time by using the

Different Size Originals mode.

* The Diff erent Size Originals mode enables you to

copy/scan diff erent size originals with the same
widths (11” x 17” and LTR, or LTRR and STMT, etc.)
or diff erent widths (11” x 17” and LGL, or LTR and
STMT, etc.) together.

■

Setting procedure:

1. Press [Copy] or [Fax]



[Options]



[Different Size Originals].

2. Select the type of different size originals



press [OK].

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands