manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 41

41

F

lo

w of Basic Oper

a

tions

 

5

4

1

2

3

7

6

7

8

 

 [Options]  2/2 

  

   Useful Send Functions (Last Page) 

1

[Delayed Send]

This mode enables you to store a send job in memory, and 
have it sent at a later time.

2

[Preview]

This mode enables you to preview the scanned data of your 
originals and to check the page count before sending your 
document. You can also delete a specifi ed page.

3

[Finished Stamp]

You can print a stamp (approximately 1/8” (3 mm) in diameter) 
on the front side of scanned and sent originals.

4

[Job Done Notice]

Press to have the machine notify the user through e-mail 
when the send job is done.

5

[E-Mail Priority]

You can set a priority level when sending e-mail.

6

[Reply-to]

You can specify a reply-to address when sending an e-mail or 
I-fax.

7

[Subject/Message]

You can specify a subject and enter a message when sending 
an e-mail or I-fax. If you do not specify a subject, it will be 
specifi ed automatically.

8

[File Name]

If you set PDF(OCR), XPS(OCR), or OOXML(OCR) as the fi le 
format, you can set [Auto (OCR)] to ‘On’ to automatically 
extract the fi rst text block in the document for use as its 
fi lename.

  

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands