manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 71

71

Routine Maint

enanc

e

 

 

 Preparing the Envelopes 

 This section explains how to prepare the envelopes before loading them into the paper drawer. 
  

 

 

 If envelopes are not neatly aligned before being loaded, a problem with the paper supply or a paper jam may occur. Fix any curls 
or bends before loading the envelopes. 

1

Take fi ve envelopes, loosen them as shown, and then stack them together.

Repeat this step fi ve times for each set of fi ve envelopes.

2

Place the envelopes on a clean, level surface, and press all the way around the 
envelopes by hand, in the direction of the arrows, to remove any curls.

Repeat this step fi ve times for each set of fi ve envelopes.

3

Hold down the four corners of the envelopes fi rmly, so that they and the sealed 
or glued portion stay fl at.

*

*  Flap

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands