manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 133

133

Tr

oubleshooting

7

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 
jam is cleared.

 

 

   Inner  Finisher-D1  (Optional) 

 Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on 
the touch panel display, to remove the jammed paper. 
  

 

 

•   The Inner Finisher-D1 and Inner 2/3 Hole Puncher-A1 are optional products. 
•   If there is paper in the output tray, remove the output paper before proceeding with this procedure. 

  

    When the Inner 2/3 Hole Puncher-A1 Is Not Attached  

1

Follow the instructions in “Main Unit” to remove any jammed paper. (

p. 111)

2

Remove any jammed paper protruding from the output tray.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands