manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 144

144

6

Return the staple case to its original position.

1

2

Push the staple case in until 
it clicks into place.

7

Gently push the saddle stitcher unit back into its original position.

1

2

1.  Pull the stapler unit 

towards you, and then 
push it down into its 
original position.

2.  Grip the handle of the 

saddle stitcher unit, and 
return it to its original 
position.

When returning the saddle stitcher unit to its original position, be careful not to get your fi ngers 
caught, as this may result in personal injury.

8

Close the front cover of the fi nisher.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal 
injury.

When you have cleared the staple jam, be sure to manually reposition the staples in the saddle stitcher unit. 
(See e-Manual > Settings/Registration.)

  

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands