manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 121

121

Tr

oubleshooting

4

Open the paper deck unit.

2

1

1.  Press the open button.
2.  Open the paper deck 

unit.

The inside lifter 
automatically descends 
to the paper loading 
position.

If the machine is in the Sleep mode (the touch panel is not displayed, and only 

(Energy Saver) is lit), you 

may be unable to open the paper deck unit. In this case, press 

(Energy Saver) to reactivate the machine, 

and then press the open button on the paper deck unit.

5

Remove any jammed paper.

Look carefully, as jammed 
paper may be diffi

  cult to 

see.

6

Close the paper deck unit.

When closing the paper deck unit, be careful not to get your fi ngers caught, as this may result in 
personal injury.

7

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 
jam is cleared.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands