Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 115

Page: 115 / 190

115

oubleshooting

Open the paper drawer’s upper right cover and lower right cover, and check
whether there is any jammed paper inside.

1. Open the paper drawer’s upper right

cover.

2. Open the paper drawer’s lower right

cover.

Remove any paper jammed, and close
the covers.

When closing the covers, be careful not to get your fi ngers caught, as this may result in personal
injury.

Gently close the covers until they click into place in the closed position.

Close the right cover of the machine.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal
injury.

• Gently close the cover until it clicks into place in the closed position.
• If the Paper Deck Unit-B2 was moved away from the main unit, reconnect it to the main unit.

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper
jam is cleared.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE 4251

Reviews:

Brands by name

Popular brands