manualshive.com logo in svg

Canon imageRUNNER ADVANCE 4251, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE 4251 Basic Operation Gude Download Page 63

63

Routine Maint

enanc

e

1

Open the paper drawer.

1.  Press the open button on 

the paper drawer in which 
you want to load paper.

2.  Grip the handle, and pull 

out the paper drawer until it 
stops.

2

Prepare the paper to load.

Open the packaging for the 
paper, and remove the paper 
stack.

•  For high-quality printouts, use paper recommended by Canon.
•  Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding. 

3

Load the paper stack into the paper drawer.

1.  Make sure that the paper 

size setting of the paper 
drawer matches the size 
of the paper to load in the 
paper drawer.

2.  Load the paper stack against 

the right wall of the paper 
drawer.

3.  Gently push the paper 

drawer back into the 
machine until it clicks into 
place in the closed position.

When returning the paper drawer to its original position, be careful not to get your fi ngers 
caught, as this may result in personal injury.

Summary of Contents for imageRUNNER ADVANCE 4251































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands