Canon i-SENSYS LBP5300 Series, User Manual

Page: 133 / 490

3-58 2-sided Printing
Loading and Outputting P
aper
3
2-sided Printing
This printer is equipped with a function that can perform 2-sided printing. Plain
paper, heavy paper (106 - 120 g/m
2
), and coated paper (105 - 120 g/m
2
) at sizes of
A4, Legal, Letter, and 8.5 x 13 can be used for automatic 2-sided printing.
IMPORTANT
• You cannot perform automatic 2-sided printing on heavy paper (121 - 220 g/m
2
),
transparencies, labels, coated paper (121 - 160 g/m
2
), and envelopes.
•
During automatic 2-sided printing, do not touch the paper until it is output to the output
tray completely. During automatic 2-sided printing, the paper is first output partially after
the front side is printed, and then it is fed again to be printed on the reverse side.
NOTE
When the last page for the 2-sided printing is 1-sided printing, the printer prints faster
than normal 2-sided printing by clicking [Finishing Details] in the [Finishing] sheet and
[Advanced Settings] in the [Finishing Details] dialog box, and then selecting the [Print
Last Page in 1-sided Mode when 2-sided Printing is Set] check box in the [Advanced
Settings] dialog box. However, when printing punched paper or previously printed paper,
the orientation or printing surface of the last page may differ from other pages. In this
case, clear the check box.
1
Load paper in the multi-purpose tray or paper cassette.
NOTE
•
On automatic 2-sided printing, the reverse side of the paper is printed first,
therefore the paper should be loaded in the opposite orientation to that for 1-sided
printing. When printing paper such as a letterhead in which faces and directional
orientations specified, load paper as follows.