Canon CLC 1130, Service Manual

Page: 901 / 965

CHAPTER 13 TROUBLESHOOTING
13-312
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Level 3
CONTROL
COLDOFST
MONO-SPD
CLR-L-SP
PRJ-L-SP
BKL-L-SP
Remarks
* C opy D ata C ontroller or
R emote D iagnostic
D evice.
0: normal
1: prohibit in full color
2: prohibit in black mono
3: prohibit at all times
(invalid in printer mode)
* This mode is not valid for
the CLC1100/1140/1160/
1180.
Description
2 For device*
The device* total counter is incremented under all
conditions; i.e., disabling control key, control
card, or ID No. input with conditions.
In the case of '3' or '4' for black-and-white copying
without a card, the copy data controller card
counter will not be incremented.
In the case of '2', '3', or '4' for remote printing
without a card, the copy data controller card
counter will not be incremented.
In the case of '2' or '4' for remote printing, the
copy data controller card counter will be
incremented regardless of the presence/absence of
a copy data controller card.
3 With ID No. Registration in Use
For '3' or '4' for black-and-white copying without
an ID No. input, the counter for the group in
question for the ID. No. will not be incremented.
For '2', '3', or '4' for remote printing without an ID
No. input, the counter for the group in question for
the ID No. will not be incremented.
For '2' or '4' for remote printing, the counter for
the group in question for the ID No. will not be
incremented regardless of the presence/absence of
an ID No. or password input.
Example
•
When CONTROL is set to '002',
In the absence of a control key, remote printing
and remote scanning are possible.
In the absence of a control card, no job is possible.
In the absence of an ID No. input, no job is
possible.
• When CONTROL is set to '421',
In the absence of a control key, only remote
scanning is possible.
In the absence of a control card, remote printing
and remote scanning are possible.
In the absence of an ID No. input, black-and-white
copying, remote printing, are remote scanning are
possible.
for R&D
for R&D
Use it to set placement of 2 sides in copier mode.
Use it to set placement of 2 sides when the projector
is in use.
*
Use it to set placement of 2 sides in back-light mode
with the projector in use.
*