Canon CLC 1130, Service Manual

Page: 517 / 965

CHAPTER 11 INSTALLATION
11-20
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) See that the developing assembly is
locked in position and the screw inside it
starts to rotate (about 10 sec).
Be sure to wait until the
selected developing
assembly is locked in
position.
4) Fit the starter developer supply funnel that
comes with the copier* in the supply
mouth of the developing assembly, and
hold it in place.
* Do not use the supply funnel, whose
mouth is too small.
• Be sure to try one color at one time.
Figure 11-229
5) Take out the M,C,Y and Bk starter bottles,
and shake them well. Peel off the seals.
6 ) Pour the starter developer into the
developing assembly.
•
Try tilting the starter developer bottle
gradually to avoid spilling.
Figure 11-230
Starter developer supply flannel
7 ) When done, press the Stop key to stop the
operation.
•
The copier will indicate ‘READY’.