Canon CLC 1130, Service Manual

Page: 510 / 965

COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
11-13
CHAPTER 11 INSTALLATION
8) Wrap lint-free paper around your finger,
and apply drum cleaner lubricant evenly
along the blade of the photosensitive
drum cleaner.
• Be sure to apply evenly. Otherwise,
vertical white lines may appear on
copy images.
• Be sure to apply on all surfaces in
addition to the edge except the bottom
surfaces.
• Do not apply as if to rub it so as to
avoid chipping the edge. Use light,
tapping strokes.
• When applying to the edge, move from
above to the edge surface as if to
collect the lubricant where the drum
comes into contact.
Cleaning blade releasing lever
Screw
Unlocked
Locked
Cleaning blade
Figure 11-219
9) Mount the photosensitive drum cleaner
with a screw.
•
Take care not to make contact with the
photosensitive drum unit.
10) While holding the cleaner blade releasing
lever in place by hand, loosen the screw so
that the cleaning blade releasing lever is in
locked position; then, screw it in place.
(When the lever is on the right, the blade
is locked in position.)
Figure 11-220
Be sure to fix the screw in
place to avoid possible
damage to the cleaner
assembly.