Canon CLC 1130, Service Manual

Page: 125 / 965

CHAPTER 4 IMAGE PROCESSING SYSTEM
4-4
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
IV. DIGITAL IMAGE PROCESSING
A. Outline
The copier uses the PCBs shown in Table 4-401 to perform digital image processing, and all
these PCBs are collectively referred to as the “image processor”.
The B, G, and R image signals from the analog image processing block are converted into Y,
M, C, and Bk image signals in the digital image processing block.
At the same time, each data unit is converted for image processing selected on the control
panel. At the end of data conversion, the image data is sent to the printer unit in the form of 8-bit
image signals.
Table 4-401
· In the table, indicates a function available as a standard, indicates a function available as an
option , and a function not available.
· Either an IP-IF PCB or an IP-ED PCB may be installed as an option .
PCB Description
IP MOTHER bus for each IP PCB
(IP motherboard)
IP-MAIN shading correction, 3-line position matching, color
(IP main) correction, original size detection, chromatic
space compression, logarithmic correction, coloring,
contouring, density correction, enlargement/reduction,
slanting, sharpness/filter processing, anti-counterfeit
processing, black character generation (black extraction)
IP-ECO assists the IP-MAIN
IP-ED interface between external devices and copier
editing functions by signals from the editor (color
conversion, texture processing)
IP-IF interface between external devices and copier
IP-PRJ auto focusing in combination with the projector and
shading correction, color correction, mirror processing
when the projector is in use
CLC1120
/1130/1150 The other