Canon CLC 1130, Service Manual

Page: 701 / 965

CHAPTER 13 TROUBLESHOOTING
13-122
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
26 E110
Cause
DC fuse PCB
Laser scanner
motor (M3)
DC driver PCB,
CPU PCB
Action
Replace the DC fuse
PCB.
End.
Check the wiring from
the motor to the DC
driver PCB; if normal,
replace the DC driver
PCB or the CPU PCB.
(After replacement,
execute the work under
II. H. 10. or II. H. 1.)
Step
1
2
Yes/No
NO
YES
NO
Checks
Is 24 V present between J375-1 and
-2 on the laser scanner driver PCB?
Replace the laser scanner motor. Is
the problem corrected?
27 E120
Cause
Laser controller
unit
DC driver PCB
CPU PCB
Action
End.
Replace the DC driver
PCB or the CPU PCB.
(After replacement,
execute the work under
II. H. 10. or II. H. 1.)
Step
1
Yes/No
YES
NO
Checks
Replace the laser controller unit. Is
the problem corrected?
28 E190
Cause
DC power supply
PCB
Connector, wiring
Laser controller
unit, CPU PCB
Action
Check the wiring and
the DC fuse PCB; if
normal, replace the DC
power supply PCB.
Connect the connectors
properly.
Try replacing the
following part in turns.
• laser controller unit
• CPU PCB
(After replacement,
execute the work
under II. H. 1.)
Step
1
2
Yes/No
NO
YES
NO
Checks
Is power present at J1200 on the
laser controller PCB?
Is there a fault in the connection
between J2009 on the CPU PCB
and J1206 on the laser controller
PCB?
Voltage
+5V
+8.8V
-8V
+24V
(+)
J1200-2
J1200-3
J1200-5
J1200-7
(-)
J1200-1
J1200-4
J1200-4
J1200-6