Canon CLC 1130, Service Manual

Page: 363 / 965

CHAPTER 7 PICK-UP / FEEDING SYSTEM
7-98
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
6) Remove the E-ring [6] from the rear side
plate of the transfer drum, and detach the
separation claw unit.
Pay attention to the spring
on the shaft of the separa-
tion claw unit.
Figure 7-866
7) Remove the two screws [7], and detach the
separation push-up solenoid [8].
Figure 7-867
12. Remove the Brush Motor (M11)
1) Remove the transfer drum from the
transfer drum frame.
2) Remove the four screws [1], and remove
the two transfer sheet scrapers [2].
Figure 7-868
[6]
[7] [8]
[2] [2]
[1] [1]