Canon CLC 1130, Service Manual

Page: 594 / 965

COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
13-7
CHAPTER 13 TROUBLESHOOTING
After wrapping the transfer
drum sheet around the
transfer drum, check the
gap between the leading
edge and the trailing edge
of the sheet; make sure it is
0±1.5 mm. If not, go back
to step 5), and make sure
that the sheet is horizontal,
and start over.
8) After making sure that there is no gap,
start attaching both ends of the sheet to the
transfer drum.
At this time, try using both thumbs as
shown, moving them as if to rub the sheet
in axial direction. (Do not move the
thumbs in peripheral direction, which can
cause parts of the sheet to lift.)
9) Remove the backing paper from the
trailing edge of the transfer drum sheet.
Figure 13-244a
Figure 13-244b
Leading edge of sheet
Trailing edge of sheet
0±1.5 mm or less
Figure 13-245
Figure 13-246
13-26a