CADDX xGenConnect, Installation And Programming Manual

Page: 149 / 166

xGenConnect Installation and Programming Guide 137
Appendix 3: NetworX Modules Compatibility
Module part
number Description Supported by
xGenConnect Remarks
NX-7002N-V3 Plug on GSM module for NX-V3
control panels No Use NXG-7002
NX-535N Voice speech module No
NX-535N-V3 Plug on Voice speech module for
NX-V3 control panels No
NX-1048-R-D-EN Multilingual LCD keypad,
wireless 868 MHz GEN2, white,
incl. batteries
No
NX-1048-D-EN Multilingual LCD keypad, wired,
white Yes No programming, limited
user functions
NX-848E Transceiver in housing for
mounting out of the box Yes Use NXG-868 for new
installations
Requires NX keypad for
programming
60-904-43-48Z 48 zone wireless receiver,
433.92 MHz (NX-448E) Yes Use NXG-433 or NXG-
9-RF-LB for new
installations
NX-1xx 8 zone LED keypad without door Yes No programming, limited
user functions
NX-13xx 16 zone LED design keypad with
removable door Yes No programming, limited
user functions
NX-15xx 16 zone LED vertical keypad with
removable door Yes No programming, limited
user functions
NX-1820E-EUR Touch screen keypad, multi-
lingual No Use NXG-1820-EUR or
NXG-183x-EUR
NX-148 LCD design keypad with
removable door Yes No programming, limited
user functions
NX-587E Virtual keypad No
NX-216E-EN 16 zone expander module for
NX-8 and NX-8E, EN approved Yes
NX-508E Output module with 8 open
collectors Yes Requires NX keypad for
programming
NX-507E Output module with 7 relays and
1 OC Yes Requires NX keypad for
programming
NX-534E-AL Two-way voice module, including
3510 No
NX-540E Telephone interface module No
NX-320-I Smart power supply and bus
extender Yes Use NXG-320 for new
installations
Requires NX keypad for
programming
NX-584E Home automation module with
two-way serial port interface No