CADDX xGenConnect Installation And Programming Manual Download Page 96

Page: 96 / 166

xGenConnect Installation and Programming Guide

5. Click the Options/Timers tab

6. Select the user options that you want to apply to this permission. Descriptions

of each item are available in

xGen Reference Guide

Next

Program Users or Devices

Programming Instructions for Menus

Goal

Create a list of menus that a user or device has access to on the xGenConnect
system.

Pre-conditions

None.

Notes

• The menus that will be available are the ones that the device has permission

to display AND the ones that a user has access to, at the specified time and
date which is controlled by Schedules.

• Users have up to 4 levels of access and devices have up to 2. This allows

very sophisticated and fine grained control of access.

• 64 custom menus can be created. The preset ones will help you create

a system quickly without needing to modify these.

Summary of Contents for xGenConnect







































































































































































Search results

Summary of Contents for xGenConnect

Reviews:

Related manuals for xGenConnect

Brands by name

Popular brands

CADDX xGenConnect, Installation And Programming Manual

Search results

Summary of Contents for xGenConnect

Reviews:

Related manuals for xGenConnect

Brands by name

Popular brands