CADDX xGenConnect, Installation And Programming Manual

Page: 17 / 166

xGenConnect Installation and Programming Guide 5
Zone Doubling
3.74 kΩ / 6.98 kΩ
See “Detector EOL Wiring” on page 23 for more
information.
Onboard outputs:
NXG-4 4: bell, strobe, siren and power outputs
NXG-8(E), NXG-9 5: bell, strobe, siren and power outputs
Maximum output number 32
Maximum action number 32
Partitions:
NXG-4 4
NXG-8(E), NXG-9 8
Maximum keypad:
NXG-4 16
NXG-8(E), NXG-9 24
Maximum expander modules, incl. keypads:
NXG-4 24
NXG-8(E), NXG-9 32
Non-volatile Memory
Main event log capacity 1024
Access event log capacity 5000
Data retention (log, program settings) 10 years
Ethernet Connection (IP only)
Supported standard IEEE 802.3u
Speed 10BASE-T or 100BASE-TX
Duplex Half-duplex and full-duplex
Cabling FTP (foiled twisted pair) Cat 5e cable or better
xGenConnect Bus
Type 4 wire RS485 bus
High common mode tolerance (25V)
Capacity Up to 32 devices
Range 800 m
Cable flammability rating VW-1
Current Consumption
Product Main description Current Consumption
(non-alarm) Current
Consumption (alarm)
NXG-8(E) 8 zone panel 125 mA typical 125 mA typical
NXG-9 8 zone panel 150 mA typical 150 mA typical
NXG-4 4 zone panel 140 mA typical 140 mA typical