CADDX xGenConnect, Installation And Programming Manual

Page: 162 / 166

150 xGenConnect Installation and Programming Guide
User An authorised person who can interact with the security system and
perform various tasks according to the permissions assigned to them.
Each user has a set of profile levels. These control what the user has
access to, a list of functions, and when the user is allowed to perform
these functions. A user is typically a person who is assigned a PIN
and arms/disarms the system with this PIN, card, or keyfob device.
Users can also be automatic functions of the system. For example,
security system can automatically arm specific partitions a user has
access to at a specified time. No human interaction is required, all
the permissions of the programmed user will still be applied and
enforced.
User code See PIN.
User group User groups define the options and permissions available to users.
Walk test A test performed by a user or installer. To pass the test, the user or
installer must walk past detectors, open doors and windows to
activate these. The intention is to test the functionality of the security
system.
Web Server The control panel has a built-in web server which provides access to
its features via a web browser interface (PC) or from Ul app.
This allows you to program and control the system without being
physically in front of a keypad.
Zone A detection device such as a motion detector (PIR), reed switch,
smoke detector, panic button, etc. Zones may be physically wired to
the security system. Also known as an input or sensor on other
security panels.