CADDX xGenConnect Installation And Programming Manual Download Page 60

Page: 60 / 166

xGenConnect Installation and Programming Guide

The menu bar is located along the bottom of the app. Touch the Zones icon (last
icon with a dot and wireless signals) to view zone status.

• Touch Bypass to ignore a zone or touch it again to restore it to normal

operation.

• Touch Chime to add or remove a zone from the Chime feature.

• Touch Notify to receive push notifications when there is activity from that

zone.

This History screen displays the event log of the xGenConnect, recording
important events and allowing authorized users the ability to audit the system.
Changing the Selected Events to Alarms will display the filtered Mandatory Event
Log.

Summary of Contents for xGenConnect







































































































































































Search results

Summary of Contents for xGenConnect

Reviews:

Related manuals for xGenConnect

Brands by name

Popular brands

CADDX xGenConnect, Installation And Programming Manual

Search results

Summary of Contents for xGenConnect

Reviews:

Related manuals for xGenConnect

Brands by name

Popular brands