CADDX xGenConnect, Installation And Programming Manual

Page: 52 / 166

40 xGenConnect Installation and Programming Guide
Quick Connect using an NXG-1820 / NXG-1830 keypad:
1. Unlock the keypad and access the Programming menu.
2. Navigate to Advanced > Communicator > IP Configuration > IP Options.
3. Navigate to Enable WiFi Internal Access Point.
4. Toggle the option on.
5. Exit menu.
On your mobile phone / tablet / laptop:
1. Navigate to WiFi settings.
2. Connect to NXG_x_xx_EU_serial number. The password is identical to the
SSID shown.
3. Open a web browser.
4. Navigate to 192.168.33.1.
5. Login to the panel.
6. Change the default password.
7. Log out.
8. Reconnect to the SSID with the new password.
9. Program required settings.
The access point will remain until the installer turns it off.
Alternatively, to manually create the WiFi Internal Access Point:
1. Default the panel.
2. Unlock the keypad and access the Programming menu.
3. Navigate to Advanced > Communicator > IP Configuration > IP Options.
4. Navigate to WiFi Internal Access Point SSID.
5. Program a valid SSID name.
6. Navigate to WiFi Internal Access Point Password.
7. Program a valid WiFi password.
8. Navigate to Enable WiFi Internal Access Point.
9. Toggle the option on.
10. Exit menu.
Method 1: DLX900 Management Software
DLX900 is an ideal tool for programming xGenConnect systems. This software is
installed on a PC with Microsoft Windows 7, 8, or 10. It features a graphical
interface, allowing installers and Central Monitoring Stations to program and