CADDX xGenConnect, Installation And Programming Manual

Page: 126 / 166

114 xGenConnect Installation and Programming Guide
8. Edit Remote Access settings for the xGenConnect system.
- Download Access Code: Gives access to DLX900 to access the
xGenConnect panel programming.
9. Click System Event Reporting.
10. Select the channel group to send system events (e.g. low battery).
Next
• Perform tests on each of the communication paths to verify they are
functioning correctly.
• Program Channels.
• Program Channel Groups.
• Verify Number of Attempts, next channels (back-up channels), and multi-path
reporting function correctly.
Programming Instructions for UltraSync
Pre-conditions
At least one user has been given a username and PIN code (see
“Programming
Instructions for Users
” on page 89).
xGenConnect is connected to internet and has been allocated an IP address
(see
“Programming Instructions for Communicator” on page 111, IP Config).
Notes:
UltraSync provides a secure VPN connection to your xGenConnect system over
the internet. You will need to provide your xGenConnect serial number, Web
Access Passcode, and a valid Username and PIN code that exists in your
xGenConnect system. These codes provide multiple levels of security for the
connection.
The Web Access Passcode is needed for:
• Web console over the internet via a secure VPN
• Ul app
• DLX900 software connecting over IP, in addition to Download Access Code