CADDX xGenConnect, Installation And Programming Manual

Page: 112 / 166

100 xGenConnect Installation and Programming Guide
Programming Sequence
6. Communicator 5. Channels 18. Channel Groups
a) Options → → →
b) IP Config
c) Ethernet
d) Radio
e) Dial IP 6. Communicator
f) Email 17. Event Lists
g) Remote Access
h) System Event
Reporting
18. Channel Groups
4. Partitions 12. Partition Groups
a) Partition Options →
b) Partition Timers
c) Partition Reporting
7. Schedule
18. Channel Groups
Instructions
1. Go to Partitions.
2. Select a Partition Number.
3. Enter a descriptive name.
4. Select the Options you want to enable for this Partition. Partition 2 and above
have
“Use Partition 1 Options” ticked to allow faster programming of your
system. Untick this box if you want to customize options for Partition 2 and
above.