Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 382 / 418

Chapter 19 Annex Parameters
19-82 CSMIM/Micro-CS Management Application Guide
rip_next_hop
specifies whether the next hop value is included in RIP version 2
advertisements.
rip_recv_version
controls the RIP versions that an Annex accepts. You can enter:
❑
1
to accept version 1 packets only.
❑
2
to accept version 2 packets only.
❑
both
to accept version 1 and 2 packets.
rip_routers
lets you force RIP to send periodic updates to a router list instead of
broadcasting updates. You can enter the IP addresses of one to eight
directly reachable routers, or you can enter
all
to restore broadcasting. The
Annex ignores any address that is not on an attached subnet.
rip_send_version
controls the RIP versions that an Annex sends over IP interfaces You can
choose:
❑
rip-1
to send version 1 packets to the broadcast address.
❑
rip-2
to send version 2 packets to the RIP multicast address.
Type Interface
Values never, needed, always
Default needed
Lists Enet Port, Async Port, Routing
Type Interface
Values 1, 2, both
Default both
Lists Enet Port, Async Port, Routing
Type Annex
Values IP address, all
Default all
Lists Annex Only, Routing