Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 322 / 418

Chapter 19 Annex Parameters
19-22 CSMIM/Micro-CS Management Application Guide
CallDef_net_inactivity
defines the amount of time an ISDN Primary Rate Annex call can remain
inactive before it is terminated. The
CallDef_net_inactivity_units
parameter
determines whether the number you enter here is in minutes or seconds.
CallDef_net_inactivity_units
determines the unit of time used for an ISDN Primary Rate Annex’s
inactivity timer.
CallDef_newline_
terminal
interprets carriage returns and line feeds for CLI. When you enter
disabled
,
a carriage return or a line feed terminates the input line and a carriage
return followed by a line feed terminates output lines. When you enter
enabled
, a line feed terminates both the input and the output lines.
CallDef_output _flow_
control
defines the method that a device uses to start or stop output from an ISDN
Primary Rate Annex. You can choose:
❑
none
to disable flow control.
❑
start/stop
to designate flow control by recognizing xon and xoff
characters.
Type Annex
Values 0 to 255
Default 0
Lists
Annex Only, Idle Timer, PPP, SLIP, Call Defaults, Sync Call
Defaults
Type Annex
Values minutes or seconds
Default minutes
Lists
Annex Only, PPP, SLIP, Idle Timer, Call Defaults, Sync Call
Defaults
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Cmd Line Editing