Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 178 / 418

Chapter 13 Viewing and Changing Parameters
13-10 CSMIM/Micro-CS Management Application Guide
messages if necessary. The
Confirmation
window allows you to
verify the
Set
command. If you selected the
Confirm Auto Reset
option and parameters that require an Annex reset, the
Reset
Parameters
window follows.
❑
displays parameter values in the work area and lists
parameters in the message box. When you use this button to
verify current values, it erases new values you entered but does
not deselect marked parameters.
An asterisk appears in the button if you use and
then change the main window’s Annex list or port information,
or this window’s port numbers. The asterisk indicates that the
message box values may not be current. It disappears when
you press again.
❑
deletes current information from the message box
and deselects marked parameters. It does not change values
displayed in the work area.
❑
displays the standard
File Selection
window. You can
enter a file name in the
Selection
field and press to store
the contents of the
Set
window’s output box, or press
to return to the
Set
window.
❑
displays a window explaining the
Set
command.
❑
removes the
Set
window from your display.
You can leave the window displayed and use
Set
again to
select a parameter option that differs from your original
selection. In this case, you must choose
again
in the main window to display these new parameters.
Changing Parameter Values
Set
allows you to change parameter values. You can select new Annexes,
ports, parameter groups, individual parameters, or check original values
during this process.
Changing Values
To change values:
Show Values
Show Values
Show Values
Clear Display
Save Msgs
OK
Cancel
Help
Close
Set