Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 92 / 418

Chapter 4 Using the Main Window
4-18 CSMIM/Micro-CS Management Application Guide
The
SNMP Information
command’s initial display does not
include values for these fields. To display current Annex
values or Annex Manager’s default values, you must use
or .
Using Check Buttons
SNMP Information
uses the following check buttons to change values for one
or more Annexes or to change Annex Manager’s default values:
❑
Update Selected Annex(es) on Apply
changes values for one or more
Annexes.
❑
Update Default Values on Apply
changes Annex Manager’s SNMP
defaults based on the values in the text fields.
Using Push Buttons
SNMP Information
uses the following push buttons:
❑
activates the command and changes
Timeout
,
Retries
,
and
Community String
values.
❑
displays SNMP default values in the window’s text
fields.
❑
displays current Annex values in the window’s text
fields. If you selected multiple Annexes that have different
values, a warning window informs you that the
SNMP Information
will not display these values.
❑
displays a window explaining this command.
❑
removes the
SNMP Information
window from your
display.
Viewing and Updating SNMP Information
Using the SNMP Information Command
To check current SNMP information or to change Annex values:
1 Create an Annex list and select one or more Annexes.
Show Default Show Annex
Apply
Show Default
Show Annex
Help
Close