Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 396 / 418

Chapter 19 Annex Parameters
19-96 CSMIM/Micro-CS Management Application Guide
tni_circuit_id
contains the transmission vendor’s circuit identifier used for customer
service calls.
tni_clock
defines the transmit clock for the T1 Network Interface. You can select:
❑
looptiming
to use the recovered receive clock at the transmit
clock.
❑
localtiming
to use the local clock as the transmit clock.
❑
throughtiming
to use the recovered receive clock from the other
interface as the transmit clock.
tni_esf_fdl
defines the protocol used by the telephone company to read the statistics
maintained by an Annex and perform diagnostic tests. You can select
none,
att, ansi
, or
other
.
tni_framing
selects the superframe format used on the T1 Network Interface. Your
selection must match the format supplied by the telephone company.
Type T1 DS1
Values 0 to 128 characters
Default “ “
Lists T1_DS1
Type T1 DS1
Values looptiming, localtiming, throughtiming
Default looptiming
Lists T1_DS1
Type T1 DS1, PRI
Values none, att, ansi, or other
Default att
Lists T1_DS1, PRI Line
Type T1 DS1
Values esf, d4
Default esf
Lists T1_DS1