Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 96 / 418

Chapter 5 Setup Mode Basics
5-2 CSMIM/Micro-CS Management Application Guide
❑
The
AppleTalk
window to configure Annexes that use the same
AppleTalk zone.
❑
The
IP
window to select Internet address and interface routing
settings.
❑
The
IPX
window to choose an IPX frame type.
❑
The
LAT
window to change LAT servers and group codes.
Setup mode uses windows that allow you to change Annex settings as well
as Help, Warning, and Confirmation windows. This section explains Setup
mode windows in the following sections:
❑
Understanding Setup Windows
❑
Displaying Setup Windows
❑
Understanding Setup Window Fields
❑
Using Push Buttons
❑
Using Confirmation Windows
Understanding Setup Windows
Setup mode uses the following types of windows:
❑
The main window provides access to Setup mode windows.
Although it always appears, you cannot return to it unless you
first close all Setup mode windows.
❑
Setup mode lets you change frequently-used settings in
General
,
Async Ports
,
Call Defaults
,
Channels
,
PRI Line
,
Security
,
AppleTalk
,
IP
,
IPX
, and
LAT
windows. You can display a window by selecting
an option from the
Setup
field that appears in each window.
When you complete the window’s fields and press ,
your changes take effect. You can then choose another
Setup
field option or press to return to the main window.
❑
A
Confirmation
window appears if you change settings and press
rather than . This window informs you that
your changes will not take effect if you continue the closing
process.
Apply
Close
Close Apply