Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 141 / 418

Creating and Changing Modem Definitions
CSMIM/Micro-CS Management Application Guide 9-3
❑
Connect Status String
contains the string the Annex uses when it
initiates an outbound call. This string lists all successful
connect messages that the modem can return. You can enter
up to 80 status codes.
❑
Dialin Setup Command
contains the command the Annex sends to
incoming modem ports before the first user connects to a port.
The command should include all modem steps required to
answer a call coming into the Annex. For example, it should
turn on the auto-answer feature and disable inbound modem
connect messages.
❑
Dialout Setup Command
contains the command the Annex sends
to all serial device ports before they becomes active. This
command should contain all configuration information required
for the Annex to initiate an outbound call. For example, it should
disable the auto-answer feature and enable modem connect
messages. You can enter up to 80 characters.
❑
Revert to default modem values
displays default values for a modem
when you have changed the default definition.
Using Push Buttons
The
Edit Modem
window uses the , , and push
buttons. For Annexes with asynchronous ports, it uses the button:
❑
deletes modems defined in the Annex configuration
file. When you press , Annex Manager removes the
modem name and definition from the
Edit Async Port
window’s
list. When you press in the
Edit Async Port
window,
Annex Manager deletes the modem definition from the Annex
configuration file.
Creating and Changing Modem Definitions
The
Edit Modem
window lets you change existing modem definitions, create
new ones, and remove definitions from the Annex configuration file.
OK Help Cancel
Remove
Remove
OK
Apply