Cabletron Systems CSMIM-T1 Administrator'S Manual Download

Page: 93 / 418

Displaying SNMP Information

CSMIM/Micro-CS Management Application Guide

4-19

For information.

Creating Annex Lists

in this chapter. If you want to

change Annex Manager’s SNMP default values only, you can
skip this step.

Move the pointer to the Option menu and choose

SNMP Information

Enter new values for

Timeout

Retries

and/or

Community String

or use

to display current values.

always displays Annex Manager’s default values.

The values that display when you use

depend on

the Annexes you selected in the main window:

❑

If you select a single Annex or multiple Annexes that have the
same values, text fields display current values.

❑

If you select multiple Annexes that have different values, a
warning window informs you that where differences exist,

values will not display. If you choose

under this

circumstance, Annex Manager uses its default values.

Select

Update Selected Annex(es) on Apply

and/or

Update Default Values on

Apply.

You can select one or both check buttons.

Choose

Annex Manager changes Annex or default values based on
the check buttons you selected and on values in the text fields.

Show Default

Show Annex

Show Default

Show Annex

Apply

Summary of Contents for CSMIM-T1



































































































































































































































































































































































































































Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands

Cabletron Systems CSMIM-T1, Administrator'S Manual

Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands